Want to place your DVD player, DVR or other devices in a cabinet or other room and still be able to control them from in front of your TV?
This IR Repeater (Remote control extender) allows you to do just that!
Simply place the IR receiver from the repeater kit where you wish to point your remote control, run the IR receivers wires from the kit to the distribution block.
Then run the IR emitters from the kit to the devices you wish to control and place them over the devices IR receivers, plug the kit into a wall outlet and your all set!
* 1 Distribution block
* 1 IR Receiver
* 1 Standard power plug
* 6 Dual IR Emitters to control up to 12 devices
* 1 Manual
* A link to an installation video
* The IR receivers cord is 5' long and can be lengthened by purchasing any length 3.5mm AV extension cable
* The distribution block measures approximately 2.25"x4.5"x1" and has slots for mounting if desired (mounting screws NOT included)
* The distribution block can also be powered by a USB printer cable (NOT included)
* The kit contains enough IR emitters to control 12 device
IMPORTANT NOTE FOR PLASMA TVS! Plasma TV's emit IR frequencies that can interfere with the IR receiver of this device because (Not applicable to LCD or LED).
This can usually be fixed by placing the IR receiver further away from the plasma TV and/or by placing a small piece of scotch tape over the IR receiver to reduce it's sensitivity!
This does not occur with LCD or LED!
This kit will not work with the following devices: Cisco RNG250 & RNG150 & Marantz devices
YueYueZou®- is a registered trademark protected by the US Trademark Law. YueYueZou® products are sold by authorized sellers only.
Eligible For Free Shipping
- To Have a Nice Home Theater : The IR repeater can control devices that are hidden behind doors or in other rooms! So just Hide your multiple Players/ Devices in cabinet or console!
- Worry-free Way to Control: The receiver can pick up the signal from the remote controller, which has got a convenient IR confirmation LED.
- Control Device at Your Own Will: 12 emitters enable you to send the signals to the A/V components.
- May ALSO be powered by USB cord as well (USB power cord NOT included)
- Working Range: 34-60kHz operating range and 3.5mm mini plu. Receive Range: 8 Meter.